イージーデータジャパン[ez-data]金型・測定器・板金CADCAM

EZ ANGLE GAUGE

 

■Feature
・Easy and stable measurements can be made by merely applying this to the work-piece.
・The measuring range is from 20 ° to 180 °.
・With various functions such as display mode selection between 0°0’(base of 60) and 0.00°(decimal), preset, etc.
・With data output function

■Specifications
Measurement range 20° to 180° degrees
Minimum reading 1′/0.01°
Accuracy ±5′
Display unit 0°0’(base of 60)/ 0.00°(decimal)
Battery UM-4 type dry battery cells x 2 pcs
Battery life About 80 hours (UM-4 type dry battery cells x 2 pcs)
Operating temperature 5 to 40℃
Storage temperature -10 to 60℃

Two styles available

1. Standard - Handheld with digital readout
2. Wireless - Handheld with digital readout and WIFI connection

 

WIFI connection enables direct communication of readouts to the machine NC controller or to Excel spreadsheets including automatic cell advance for recording multiple readings.

 

WIFI connection can be configured to communicate directly with NC machine controllers enabling real-time adjustment to the bending cycle.

How to use

How to use

 


1.
Power
Press ON/OFF button Powering ON, degree is displayed on the LCD.







2.Retract
Press PRESET button after setting the movable square into the probe. 90 degree is displayed on the LCD.







3.Measure
Measure the angle by setting the product into the probe. Pressing Hold button, you can retain the displayed angle.("H" light on) Pressing the Hold button again,release the hold button again.("H" light off)






4.Data transfer
Pressing red DATA button,measured angle is sent to NC controller.Pressing the Hold button retains the displayed readings.